RELAY/FUSE CARRIER MOUNT WITH Vehicle Electrical System Control Module -J519-, REMOVING AND INSTALLING: Installing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing Fuse Panel Mount

Courtesy of AUDI OF AMERICA, LLC

Install in reverse order of removal. Note the following:

Tightening specification. Refer to OVERVIEW - INSTRUMENT PANEL RELAY CARRIER/FUSE CARRIER AND A-PILLAR RELAY CARRIER/FUSE CARRIER .

-- Engage the retaining pins -1- on the mount -3- at the side guide in the A-pillar -arrow-.

-- Tighten the nut -2-.

-- Install the air duct to the left instrument panel vent. Refer to OVERVIEW - AIR ROUTING AND AIR DISTRIBUTION IN PASSENGER COMPARTMENT .

-- Install the left side instrument panel vent. Refer to INSTRUMENT PANEL VENT, REMOVING AND INSTALLING .