LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 506 (Wiring (Sedan)) >> 97 Wiring >> Relay Carriers, Fuse Panels And E-Boxes >> E-Box, Removing And Installing >> Suppressor -C24-, REMOVING AND INSTALLING >> Removing

Suppressor -C24-, REMOVING AND INSTALLING: Removing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove fuse panel B inside the engine compartment E-box. Refer to Fuse Panel B -SB- IN ENGINE COMPARTMENT E-BOX, REMOVING AND INSTALLING .

NOTE:

The connectors do not need to be disconnected.

-- Cut the cable tie -2-.

Fig 1: Identifying Suppressor Components
GWWA97-10470Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -1-.

-- Remove the Suppressor -C24- -item 3-.