Fuse Carrier In Engine Compartment E-Box, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Fuse Panel B Components

Courtesy of AUDI OF AMERICA, LLC

-- Remove fuse panel B. Refer to Fuse Panel B -SB- IN ENGINE COMPARTMENT E-BOX, REMOVING AND INSTALLING .

-- Release the retaining clip -arrow- and push the fuse panel -2- back and out and disengage it.

NOTE:

Ignore the remaining -items-.

-- Unlock the release and remove from the fuse carrier, if equipped.

Fig 2: Releasing Clips And Removing Cover From Fuse Holder

Courtesy of AUDI OF AMERICA, LLC

-- Remove the fuses from the fuse carrier.

-- Release the retaining clips -arrows- and remove the cover from the fuse carrier.

-- Pull off retaining strip -1- for the connectors -arrow- and remove the connectors from the plug-in socket

Fig 3: Pulling Off Retaining Strip

Courtesy of AUDI OF AMERICA, LLC

NOTE:

The exact assignment of the fuse panel in the engine compartment E-box can be found in the applicable wiring diagram. Refer to appropriate SYSTEM WIRING DIAGRAM.