LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 506 (Wiring (Sedan)) >> 97 Wiring >> Control Modules >> Garage Door Opener Control Module, Removing And Installing >> Garage Door Opener Control Module -J530-, REMOVING AND INSTALLING, THROUGH MY 2012 >> Removing

Garage Door Opener Control Module -J530-, REMOVING AND INSTALLING, THROUGH MY 2012: Removing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing And Installing Garage Door Opener Control Module -J530- (Through MY 2012)
GWWA96-10461Courtesy of AUDI OF AMERICA, LLC

-- Remove the lock carrier cover. Refer to Front Bumper .

-- Disconnect the connector -1-.

-- Release the clip -arrow- and remove the Garage Door Opener Control Module -J530- -item 2- from the frame.