LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 506 (Wiring (Sedan)) >> 97 Wiring >> Control Modules >> Data Bus On Board Diagnostic Interface -J533-, REMOVING AND INSTALLING >> Installing

Data Bus On Board Diagnostic Interface -J533-, REMOVING AND INSTALLING: Installing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

-- Install the glove compartment. Refer to Storage Compartments and Covers .

-- Follow the instructions on the Vehicle Diagnostic Tester display with a new Data Bus On Board Diagnostic Interface -J533-.