Lane Change Assistance Control Module -J769- / Lane Change Assistance Control Module 2 -J770-, Removing And Installing, AUDI RS 4: Removing
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the rear bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
-- Disconnect the connector -3-.
-- Remove the bolts -arrows-.
-- Remove the lane change assistance control module -2- out from the mount -1- on the bumper -arrow-.