LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 505 (Interior Lights & Switches (Sedan)) >> 96 Interior Lights, Switches >> Lamps >> Central Locking -SAFE- Indicator Lamp -K133-, REMOVING AND INSTALLING >> Installing

Central Locking -SAFE- Indicator Lamp -K133-, REMOVING AND INSTALLING: Installing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

The new Central Locking -SAFE- Indicator Lamp -K133- must be connected with the door trim wiring harness.

-- Disconnect the wire and connect it with the new wire for the Central Locking -SAFE- Indicator Lamp -K133-. Refer to WIRING HARNESS AND CONNECTOR REPAIRS .

-- Slide the central locking LED in until it engages audibly.

-- Install the door trim panel. Refer to INSTRUMENT PANEL VENT, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals