Cigarette Lighter -U1-, REMOVING AND INSTALLING: Removing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying 12 V Socket And Release Tool T40148

Courtesy of AUDI OF AMERICA, LLC

-- Remove the Cigarette Lighter Illumination Bulb -L28-. Refer to Cigarette Lighter Illumination Bulb -L28-, REMOVING AND INSTALLING .

-- The release tabs -2- on the Cigarette Lighter Release Tool T40148 must engage into the openings in the Cigarette Lighter -U1- -item 3- -arrow-. To do so, the threaded rod -1- must be slid downward until it stops.

-- Slide the Cigarette Lighter Release Tool T40148 into the Cigarette Lighter -U1- -item 1- until it stops.

Fig 2: Identifying Release Tool T40148

Courtesy of AUDI OF AMERICA, LLC

-- Rotate the thumbwheel -2- on the Cigarette Lighter Release Tool T40148 clockwise as far as the stop.

The piston -2- is pulled upward and the release tabs -1- on the Cigarette Lighter Release Tool T40148 spread -arrows-.

Fig 3: Identifying Release Tool T40148 In Use
Courtesy of AUDI OF AMERICA, LLC

-- Remove the cigarette lighter from the lighting ring using the Cigarette Lighter Release Tool T40148.

-- Release the clips in direction of -arrow-.

Fig 4: Identifying Socket Illumination Bulb

Courtesy of AUDI OF AMERICA, LLC

-- Remove the cigarette lighter with the illumination ring -1- from the front ashtray -2-.