12 V Socket 2 -U18-, REMOVING AND INSTALLING: Removing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying 12 V Socket And Release Tool T40148

Courtesy of AUDI OF AMERICA, LLC

-- The release tabs -2- on the Cigarette Lighter Release Tool T40148 must engage in the openings in the 12 V socket -3- -arrow- and the threaded pin -1- must slide down as far as the stop.

-- Open the cover -2- on the 12 V socket and hold it in this position.

Fig 2: Identifying Cigarette Lighter Release Tool T40148

Courtesy of AUDI OF AMERICA, LLC

-- Slide the Cigarette Lighter Release Tool T40148 as far as the stop into the 12 V socket -3-.

-- Rotate the thumbwheel -1- on the Cigarette Lighter Release Tool T40148 clockwise as far as the stop.

The piston -2- is pulled upward and the release tabs -1- on the Cigarette Lighter Release Tool T40148 spread -arrows-.

Fig 3: Identifying Release Tool T40148 In Use
Courtesy of AUDI OF AMERICA, LLC

-- Remove the 12 V socket from the illumination ring with the Socket Illumination Bulb -L42- using the Cigarette Lighter Release Tool T40148.

-- Disconnect the connector.