Anti-Theft Alarm System Sensor -G578-, REMOVING AND INSTALLING: Removing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Anti-Theft Alarm System Sensor

Courtesy of AUDI OF AMERICA, LLC

-- Remove the front interior/reading lamp. Refer to FRONT INTERIOR LAMP/READING LAMP, REMOVING AND INSTALLING .

-- Release the clips -B arrows- and remove the anti-theft alarm system individual sensor -item 1- from the interior lamp/reading lamp.

-- Free up the wire -2-.

-- Release the clips -A arrows- and remove the Anti-Theft Alarm System Sensor -G578- -item 3- from the interior lamp/reading lamp.

-- Press the clips to the side -A arrows- and remove the Anti-Theft Alarm System Sensor -G578- -item 1- from the mount -2-.

Fig 2: Removing Anti-Theft Alarm System Sensor

Courtesy of AUDI OF AMERICA, LLC

-- Release the clips -B arrows- and press the anti-theft alarm system individual sensors -3- out of the mount.