Alarm Horn -H12-, REMOVING AND INSTALLING: Removing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Plenum Chamber Covers

GWWA92-10115

Courtesy of AUDI OF AMERICA, LLC

Vehicles through 05/2008:

-- Unclip and remove the plenum chamber covers -1- and -2-.

NOTE:

Ignore -item 3- and the -arrow-.

Vehicles from 06/2008:

Fig 2: Identifying Plenum Chamber Cover Clips

GWWA92-10166

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -3-.

-- Remove the clips -2- from the mount and remove the plenum chamber cover -1-.

All vehicles:

Fig 3: Removing/Installing Alarm Horn

GWWA96-10465

Courtesy of AUDI OF AMERICA, LLC

-- Remove the nut -3-.

-- Disconnect the connector -1-.

-- Remove the Alarm Horn -H12- -item 2- upward.