LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 504 (Steering (Sedan)) >> 48 Steering >> Steering Wheel >> Steering Wheel, Removing And Installing >> Installing

Steering Wheel, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Installation is the reverse of removal, with special attention to the following:

Tightening specifications. Refer to OVERVIEW - STEERING WHEEL .

Before positioning steering wheel, make sure wheels are in straight position.

-- When installing a removed steering wheel, ensure that the markings on the steering column/steering wheel are aligned.

-- When installing a new steering wheel (without a marking): mount the steering wheel in its center position (the steering wheel spokes must be horizontal and the wheels must be in the straight-ahead position).

-- Install steering wheel.

-- Install the airbag unit. Refer to AIRBAG UNIT WITH IGNITER, REMOVING AND INSTALLING .

-- Perform road test.

-- If steering wheel is crooked, remove it again and rotate it on steering column splines.