Servotronic Solenoid Valve -N119-, REMOVING AND INSTALLING: Removing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Servotronic Solenoid Valve Remove/Install Components

Courtesy of AUDI OF AMERICA, LLC

Replacement is only possible when the steering gear is removed.

-- Remove the steering gear. Refer to HYDRAULIC POWER STEERING GEAR, REMOVING AND INSTALLING .

-- Always the clean steering gear -6- in the Solenoid Valve -- -3- area.

-- Make sure dirt cannot get into the steering gear -6-.

-- Disconnect the connector -8-.

-- Make sure dirt cannot get into the connector -8-.

-- Remove the bolts -1- and -2-.

-- Remove the solenoid valve -- -3- from the steering gear -6-.

-- Remove the screen -7- from the steering gear -6- and clean steering gear, if necessary.