Fender Seal, Removing And Installing
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Seal
- Self-adhesive.
- Remove the protective film and slide the seal onto the fender mounting flange under the wheel housing liner as illustrated.
- Fender Flange
- Slide the seal onto the fender flange between the wheel housing liner and the inside of the fender.
- Fender
- Wheel Housing Liner