Fender Brace, Removing And Installing
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Brace
-- The bumper is removed and press the wheel housing liner to the side in the area of the brace.
-- Remove the nuts -2- to remove it.
- Nut
- 8 NmNOTE:
The brace is secured on the right side with bolts that must be tightened to 10 Nm.
- 8 Nm
- Longitudinal Member
- Fender
- Bumper Cover Mount
- There are different versions.
- Nut
- 4 Nm