Special Tools
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2015 Audi S4, 2015 Audi A4 Quattro, and 2014 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Puller VW 391
- Slide Hammer - Complete Set VW 771
- Pulling hook VW 771/37
- Thrust Piece T40112
- Retainer 3028
- Seal Driver-Frt Wheel Bearing 3143
Special tools and workshop equipment required
- Counterhold tool Touareg V10 T10172 and adapters T10172/5
- Socket XZN 12 T40154
- Engine/Transmission Jack VAG 1383 A with Universal Transmission Support VAG 1359/2
- Needle Bearing Drift VW 295
- Puller T10037
- Thrust Piece T40110
- Thrust Piece T40111
- Thrust Plate VW 401
- Thrust Plate VW 402
- Punch VW 407
- Sleeve 32 - 119
- Thrust Pad 3062
- -3- Separating Device 22 to 115 mm, for example Kukko 17/2
- -3- Separating Device 22 to 75 mm, for example Kukko 17/1
- Adapter T10235
- Friction Meter VAS 6222
- Punch VW 407
- Thrust Disc VW 412
- Sleeve 40 - 20
- Alignment Fixture-4W Dr. Shaft 3139
- Counterhold Tool Touareg V10 T10172 and Adapters T10172/5
- Engine/Transmission Jack VAG 1383 A with Universal Mount VAG 1359/2
- Support VAS 6199 VW 785/1 B
- Locking Pliers VAS 6199
- Inductive Heat Unit VAS 6414