Oil pump, removing and installing

WARNING: This page is about a different car, the 2009 Audi A4, 2008 Audi A4, 2007 Audi A4, 2006 Audi A4, and 2005 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Removing

Remove lower section of oil pan → Lower part of oil pan, removing and installing .

Fig 1: Removing Oil Pump Bolts

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove bolts - arrows -.
Pull oil pump forward and off from drive shaft.

Installing

Installation is in reverse order of removal, note the following:

NOTE:

Replace O-rings.

Install oil pump onto drive shaft and fasten.
Install lower section of oil pan → Lower part of oil pan, removing and installing .
Add engine oil and check oil level → Oil level, checking .

Torque specifications

Component	Nm
Oil pump to upper part of oil pan	20