LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 496 (Antilock Brake System (Sedan) (As Of 01.2014)) >> 45 Antilock Brake System >> Sensors >> Parking Brake Contact Switch, Removing And Installing >> Removing

Parking Brake Contact Switch, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the center console (MMI). Refer to CENTER CONSOLE, REMOVING AND INSTALLING .

-- Remove the Parking Brake Contact Switch -F321- -1-. Refer to OVERVIEW - CENTER CONSOLE CONTROLS .

Fig 1: Identifying Hold / Parking Brake Switches
GWWA46-10107Courtesy of AUDI OF AMERICA, LLC

The switch is clipped into the front of the center console on the side.

scientia non olet · About LEMON Manuals