Tie Rod, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Dimension From Center Of Wheel To Lower Edge Of Wheel Housing

Courtesy of AUDI OF AMERICA, LLC

-- Determine dimension -a- from the center of the wheel to the lower edge of the wheel housing before starting work while the vehicle is resting on its wheels.

-- Place the vehicle on a hoist.

-- Remove the wheel.

-- Remove the bolt -4-.

Fig 2: Identifying Bolt

Courtesy of AUDI OF AMERICA, LLC

-- Mark the position of the bolt -1- to the subframe -2-.

-- Remove the nut and the bolt -1-.

-- Remove the tie rod -5-.