LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 494 (Wheels & Tire General Information (Sedan)) >> 44 Wheels, Tires, Wheel Alignment >> General Information >> General Information

General Information

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

It is obligatory that the tire pressure label for the tire pressure be in the vehicle.

If there is no tire pressure label in the vehicle, one may be ordered .

The correct adjustment of the axle geometry while performing a vehicle alignment is an important requirement for an optimal service life of the tire. Therefore, the adjustment of the axle geometry must lie within the specified tolerance range.

Information for the vehicle alignment, refer to VEHICLE ALIGNMENT .

The running characteristics of the tire change in the course of normal wear. Rolling noises and vibrations can result from this. These are not damage in the sense of tire defects, but rather symptoms resulting from use. These can be corrected, at least partially, by specific measures. In certain cases, rolling noise cannot be completely eliminated.