LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 491 (Brake System - Hydraulic Components (Sedan) (As Of 01.2014)) >> 47 Hydraulic Components >> Vacuum System >> Brake Electric Vacuum Pump, Removing And Installing >> Brake Electric Vacuum Pump, Removing And Installing, Except RS 5 >> Notes

Brake Electric Vacuum Pump, Removing And Installing, Except RS 5: Notes

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

The construction of the vacuum pump V192 depends on the engine.

The Brake System Vacuum Pump -V192- is switched on by the engine control module depending on the intake manifold pressure.

The vacuum pump is not intended to be serviced. In case of complains, determine the cause with the help of a function or leak test. If there is a malfunction, replace the electric vacuum pump.