LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 491 (Brake System - Hydraulic Components (Sedan) (As Of 01.2014)) >> 47 Hydraulic Components >> Vacuum System >> Brake Electric Vacuum Pump, Removing And Installing >> Brake Electric Vacuum Pump, Removing And Installing, Except RS 5 >> Installing

Brake Electric Vacuum Pump, Removing And Installing, Except RS 5: Installing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal.

-- Press the right and left clip -arrow- into the bracket by hand and secure the Brake System Vacuum Pump -V192-.

Fig 1: Identifying Brake System Vacuum Pump V192 Upward From Bracket
GWWN47-0234Courtesy of AUDI OF AMERICA, LLC
NOTE:

Use new clamps when installing the vacuum line.