Brake Caliper Piston, Removing And Installing, 1LA And 1LJ: Removing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Use compressed air to push the piston out of the brake caliper housing.

Fig 1: Identifying Protective Cap From Brake Caliper With Trim Removal Wedge 3409

Courtesy of AUDI OF AMERICA, LLC

NOTE:

Place a wooden board into the recess of the caliper housing so it is not damaged.

-- Remove the seal.

Fig 2: Identifying Seal With Trim Removal Wedge 3409

Courtesy of AUDI OF AMERICA, LLC

-- To do so, use the Trim Removal Wedge 3409.

NOTE:

When removing, make sure that surface of cylinder is not damaged.