Brake Line Routing
Brakes and brake lines are delivered as ready-to-install replacement parts.
Secure brakes and brake lines at original fastening points when installing.
Lines to hydraulic assembly
-- Tighten the hex nuts -1- through -4- to 14 Nm.
-- Tighten the hex nuts -5- and -6- to 14 Nm.
Brake hose on brake caliper to front axle
-- Item -1- - brake hose, ensure retaining tabs are seated correctly in bracket.
-- Item -2- - retaining spring.
-- Item -3- - brake pipe line, 14 Nm.
-- Item -1- - brake pipe line, 14 Nm.
-- Item -2- - retaining spring.
-- Item -3- - brake hose, ensure retaining tabs are seated correctly in bracket.
Brake line routing in wheel housing to front axle
-- Item -1- - brake pipe line, 14 Nm.
-- Item -2- - intermediate piece.
-- Item -3- - brake pipe line, 14 Nm.
Brake line connection in wheel housing to front axle
--
-- Item -1- - brake hose bracket.
-- Item -2- - brake line, 14 Nm.
Brake line routing to rear axle
-- Item -1- - brake hose in brake caliper 20 Nm.
-- Item -2- - brake hose bracket, ensure retaining tabs are seated correctly in bracket.
-- Item -3- - retaining spring
-- Item -4- - brake line, 14 Nm.