LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 491 (Brake System - Hydraulic Components (Sedan) (As Of 01.2014)) >> 47 Hydraulic Components >> Brake Booster/Brake Master Cylinder >> Brake Fluid Reservoir Cover, Removing And Installing >> Installing

Brake Fluid Reservoir Cover, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Place the brake fluid reservoir cover over the brake fluid reservoir.

-- Install the bolt -4- and tighten.

Fig 1: Identifying Brake Master Cylinder Components
GWWA47-10054Courtesy of AUDI OF AMERICA, LLC

-- Install the plenum chamber cover. Refer to PLENUM CHAMBER COVER, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals