Center Differential Housing - Tightening Specification And Sequence

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 Audi A4 Quattro, 2015 Audi A4 Quattro, 2014 Audi A4 Quattro, 2013 Audi A4, and 2012 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Replace the bolts for the center differential housing.

-- Tighten the bolts in three steps in the sequence shown:

Fig 1: Center Differential Housing Bolts Loosening And Tightening Sequence

Courtesy of AUDI OF AMERICA, LLC

Stage	Bolts	Tightening Specification/Additional Turn
1.	-1- and -6-	3 Nm
2.	-1 through 6-	10 Nm
3.	-1 through 6-	Tighten 90° further