Brake Rotor, Replacing, 1LM: Removing
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Raise the vehicle.
-- Remove the wheels.
-- Remove the brake pads. Refer to BRAKE PADS, REMOVING AND INSTALLING, 1LM .
-- Remove the brake caliper. Refer to BRAKE CALIPER, REMOVING AND INSTALLING, 1LM .
Secure the brake caliper to the vehicle with a suitable wire. Do not support the weight of the brake caliper with the brake hose.
-- Remove the bolt -1- from the brake rotor.
-- Remove the brake rotor from the wheel hub.
NOTE:
When removing the brake rotor from the wheel hub, do not tilt the brake rotor.