Brake Caliper, Removing And Installing, Ceramic Brakes 1LW: Notes
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Do not loosen the bolts -1- to remove the brake caliper.
- 4 -
Brake Caliper
- do not hang on brake hose during necessary installation steps, but rather secure to body with wire.
- 10 -
Bolts
- 196 Nm.
Always replace if removed
- 196 Nm.
- 11 -
Brake Carrier
- 190 Nm
- Bolt to wheel bearing housing
- Bolted with brake caliper
- 13 -
Bracket Bolt
- 25 Nm
- 16 -
Brake Line Bracket
- Hook in brake line