Brake Caliper, Removing And Installing, 1LT And 1LY: Removing
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Raise the vehicle.
-- Remove the wheels.
-- Remove the brake hose from the bracket.
-- Disconnect the brake wear indicator on the left brake caliper.
-- Remove the bolts -5- on the brake carrier.
-- Remove the brake carrier with brake pads and the brake caliper.
Do not let the brake caliper with the brake carrier hang from the brake hose. Secure it to the body with suitable cable ties or wire. Do not support the weight with the brake hose.
WARNING:
Do not press the brake pedal when the caliper is removed.