Inner Tail Lamps, Removing And Installing, Led (Sedan From My 2013): Installing
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
- Tightening specification: 4 Nm
NOTE:
Replace the entire inner tail lamp if the LED is faulty.
Make sure the seal between the body and tail lamp housing seals correctly.