Outer Bulb Socket, Removing And Installing (AVANT): Installing
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Tightening specification: 3.5 Nm
Install in reverse order of removal. Note the following:
-- Insert the new bulbs into the bulb socket. Do not touch the glass bulbs with bare hands.
-- Install the outer tail lamp. Refer to OUTER TAIL LAMPS, REMOVING AND INSTALLING, AVANT .