LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 487 (Exterior Lights & Switches (Sedan)) >> 94 Exterior Lights, Switches >> Tail Lamps >> Bulb Holder, Removing And Installing >> Body Bulb Socket, Removing And Installing, Led (AVANT Through My 2012) >> Installing

Body Bulb Socket, Removing And Installing, Led (AVANT Through My 2012): Installing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

-- Insert the new bulb into the socket without touching the bulb with bare hands.

-- Turn the bulb socket clockwise to secure it.

-- Install the outer tail lamp. Refer to OUTER TAIL LAMPS, REMOVING AND INSTALLING, LED, AVANT THROUGH MY 2012 .