Parking Aid Control Module -J446-, REMOVING AND INSTALLING : Removing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing Parking Aid Control Module From Frame

Courtesy of AUDI OF AMERICA, LLC

-- Open the right luggage compartment side trim panel cover.

-- Release the clip -2- and pull the Parking Aid Control Module -J446- -item 1- out of the frame.

-- Disconnect the connectors -3 through 5-.