High-Mounted Brake Lamp Bulb -M25-, REMOVING AND INSTALLING (SEDAN): Removing
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Do not press the brake pedal.
-- Remove the D-pillar trim panel. Refer to D-PILLAR TRIM PANEL, REMOVING AND INSTALLING .
-- Loosen the headliner from the body in the area of the high-mounted brake lamp. Refer to OVERVIEW - HEADLINER .
-- Pull the high-mounted brake lamp -2- back evenly opposite the direction of travel by the cover -arrows-.
-- Disconnect the connector -1-.