High-Mounted Brake Lamp Bulb -M25-, REMOVING AND INSTALLING (SEDAN): Installing
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
NOTE:
The entire high-mounted brake lamp must be replaced in the event of faulty LEDs.
-- The mount -2- for the high-mounted brake lamp -3- must engage evenly at the left and right in the guide rails -1-.
-- Slide the high-mounted brake lamp evenly forward in the direction of travel without tilting it until it engages audibly -arrows-.