Fog Lamp, Removing And Installing (Through My 2012): Removing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing Bumper Cover Air Inlet Grille (Through MY 2012)

Courtesy of AUDI OF AMERICA, LLC

-- Turn off the ignition and remove the key.

-- Turn the headlamp switch to "0".

-- Release the retaining hooks -A arrows- with a screwdriver.

-- Remove bumper cover air inlet grille -1- -arrow B-.

-- Remove the bolts -1- and -2-.

Fig 2: Identifying Fog Lamp & Screws

Courtesy of AUDI OF AMERICA, LLC

-- Remove the headlamp housing -3- from the bumper cover while guiding the retaining tab -arrow- out of the mount.

-- Disconnect the connector.