Impact Member Mount, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Tightening specification. Refer to OVERVIEW - IMPACT MEMBER, STANDARD ALLROAD .

Install in reverse order of removal. Note the following:

-- Install the left and right luggage compartment side trim panels. Refer to FRONT DOOR TRIM PANELS .

-- Install the tie downs. Refer to TIE DOWN, REMOVING AND INSTALLING .

-- Install the impact member. Refer to IMPACT MEMBER, REMOVING AND INSTALLING, VEHICLES WITHOUT TRAILER HITCH .

-- Install the rear bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .