Upper Guide Piece Removing And Installing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Removing

-- Remove the rear bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .

-- Remove the bumper cover side mount. Refer to BUMPER GUIDES, REMOVING AND INSTALLING .

-- Remove the bolts -arrows- and the bumper cover locking mechanism -1-.

Fig 1: Identifying Bumper Cover Side Mount And Fasteners

Courtesy of AUDI OF AMERICA, LLC

Installing

Tightening specification: 1.5 Nm.

Install in reverse order of removal. Note the following:

-- Install the bumper cover side mount. Refer to BUMPER GUIDES, REMOVING AND INSTALLING .

-- Install the rear bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .