Tail Pipe Trim Mount, Removing and Installing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Removing

-- Remove the tail pipe trim. Refer to ATTACHMENTS, REMOVING AND INSTALLING, AUDI RS 4 .

-- Carefully remove the retaining clips -3- from the guide straps -2- with the screwdriver.

-- Remove the mount -1- from the bumper cover.

Fig 1: Removing Mount -1- From Bumper Cover

Courtesy of AUDI OF AMERICA, LLC

Installing

Install in reverse order of removal. Note the following:

-- Install the tail pipe trim. Refer to ATTACHMENTS, REMOVING AND INSTALLING, AUDI RS 4 .