Overview - Impact Absorber, Vehicles Through My 2012

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Overview Of Impact Absorber (Vehicles From MY 2012)

Courtesy of AUDI OF AMERICA, LLC

Impact Member
- Removing and installing. Refer to IMPACT ABSORBER, REMOVING AND INSTALLING, VEHICLES THROUGH MY 2012 .
Low Tone Horn -H7-
- Removing and Installing. Refer to High Tone Horn -H2- /Low Tone Horn -H7-, REMOVING AND INSTALLING .
Right Spacer
- For the bumper cover
Right Impact Bar Bracket
- Removing and installing. Refer to MOUNT FOR IMPACT BRACKET, REMOVING AND INSTALLING, VEHICLES THROUGH MY 2012 .
High Tone Horn -H2-
- Removing and Installing. Refer to High Tone Horn -H2- /Low Tone Horn -H7-, REMOVING AND INSTALLING .
Bolt
- 30 Nm
Left Spacer
- For the bumper cover
Bolt
- 4 Nm
- Secures the lock carrier.
Bolt
- 30 Nm
Left Impact Bar Bracket
- Removing and installing. Refer to MOUNT FOR IMPACT BRACKET, REMOVING AND INSTALLING, VEHICLES THROUGH MY 2012 .
Bolt
- 20 Nm
Nut
- Tightening specification: 9 Nm. .