Impact Absorber, Removing And Installing, Vehicles From My 2013: Removing
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
When installing, bring all cable ties back to same positions.
-- Remove the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
-- Audi RS 4: Remove the air ducts. Refer to Charge Air System .
-- Disconnect the connector -4- from the horns.
-- Pull the release button -5- and am free up the impact member to remove the windshield washer fluid hose -6-.
-- Remove the nuts -7- and bolts -2- upward.
NOTE:
Pry the impact bar out of the mounts if it is not easy to remove.
-- Remove the impact bar -1- from the mounts -3-.