Impact Member Bracket, Removing And Installing, Vehicles From My 2013: Removing
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
-- Remove the side impact bar. Refer to IMPACT ABSORBER, REMOVING AND INSTALLING, VEHICLES FROM MY 2013 .
-- Remove the headlamp housing mount. Refer to OVERVIEW - HEADLAMP HOUSING MOUNT (VEHICLES THROUGH MY 2012) .
-- Mark the installation position of the mount to the lock carrier for installation later.
-- Remove the bolts -arrows-.
-- Remove the nut -1-.
-- Tip the impact member mount -2- on the lock carrier out and remove it.