Bumper Cover, Adjusting
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Procedure
-- Remove the lock carrier cover. Refer to LOCK CARRIER COVER, REMOVING AND INSTALLING .
-- If the gap dimension is not even, position the wrench on the adjusting bolt -1- and adjust the gap dimension for the front bumper cover -2-.
-- Check the gap dimension again and repeat the adjustment if necessary.