Overview - Sill Panel Strip, Front Sill Panel Strip
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The overview is based on the driver side. The passenger side is similar and the components are installed reversed from left to right.
- Clip
- Quantity: 4
- Insert in the trim panel
- Replace if damaged or deformed
- Remove the clips that are still in the mounting points on the body using the Omega Clip Tool T40280.
- A-Pillar Gap Cover
- Removing and installing. Refer to A-PILLAR GAP COVER, REMOVING AND INSTALLING .
- Operating Lever
- For the cable
- Driver side only
- Removing and installing. Refer to HOOD RELEASE LEVER, REMOVING AND INSTALLING .
- Bolt
- 2.5 Nm
- Driver side only
- Front Sill Panel Strip
- Removing and installing. Refer to SILL PANEL STRIP, REMOVING AND INSTALLING, FRONT SILL PANEL .