Hood Release Lever, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Pull the securing clip -2- out of the operating lever -1- slightly -arrow A- using a small screwdriver.
-- Pull the operating lever back -arrow B- to release the hood and hold it in this position.
CAUTION:
If the operating lever is pulled out crooked, the mount could be damaged.
-- At the same time, pull the operating lever level with the center of the vehicle and out of the mount -arrow C-.