LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 485 (Interior Trim (Sedan)) >> 70 Interior Trim >> Passenger Compartment Trim >> Hood Release Lever, Removing And Installing >> Installing

Hood Release Lever, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

-- Slide the clip completely into the operating lever.

-- Press the operating lever onto the mount in the mounting bracket and engage it.

scientia non olet · About LEMON Manuals