B-Pillar Trim Panel, Removing And Installing, Upper B-Pillar Trim Panel: Removing
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Follow all Safety Precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS .
-- Remove the front belt end fitting. Refer to FRONT BELT END FITTING, REMOVING AND INSTALLING .
-- Press belt height adjuster button and bring height adjuster slide into lowest position.
-- Unclip the upper B-pillar trim -2- -arrows A- by inserting the Trim Removal Wedge 3409 into the lower edge of the trim.
-- Remove the upper B-pillar trim panel from the bracket on the body -arrow B- by moving the trim panel toward the inside and pulling it downward at the same time.
-- Guide the seat belt webbing and the belt tongue -1- out through the slide for the seat belt height adjuster -3- and then remove the upper B-pillar trim.