Upper Control Arm, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the wheel.
-- Disconnect the threaded connection -1-.
-- Remove booth joint pins in the upper control arm -2- from the wheel bearing housing.
The slits in the wheel bearing housing must not be widened using a chisel or similar tool!
-- Remove the nuts -3- and -6-.
-- Remove the bolts -4- and -5- and remove the upper control arm upward.