Stabilizer Bar, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the noise insulation. Refer to OVERVIEW - NOISE INSULATION .

A5 through August 2007

Fig 1: Identifying Stabilizer Bar And Nuts & Clamps

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect left and right connectors -2-.

-- Remove the left and right nuts -1- and remove the clamps -3-.

-- Remove the stabilizer bar.

A4/A5 from September 2007

Fig 2: Identifying Nuts (Install But Do Not Tighten)

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect left and right connectors -2-.

-- Remove the left and right nuts -1- and remove the clamps -3-.

-- Remove the stabilizer bar.