SUBFRAME Without Steering Gear, Removing And Installing: Installing: Notes
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Installation is the reverse of removal, with special attention to the following:
Tightening specifications. Refer to OVERVIEW - SUBFRAME .
Tightening specifications. Refer to OVERVIEW - SUSPENSION STRUT AND UPPER CONTROL ARM .
Tightening specifications. Refer to OVERVIEW - LOWER CONTROL ARM AND BALL JOINT .
Tightening specifications. Refer to OVERVIEW - WHEEL BEARING .